HOW TO DO IT

HOW TO FLASH NEW FIRMWARE into GEOACTION ?

Simple way with steps:

1. Set correct mode for flash.
dip.jpg
DIP switch should be set to:

   1. LEFT,
   2. LEFT,
   3. LEFT,
   4. RIGHT,

2. Check FLASH chip on board.
file_chipset.jpg
If you have ATMEL chip please use: ATMEL
If you have AMD or AMC chip please use: AMD or AMC
3. Download new firmware. For example: GA+MA.PACK
4. Unzip files and find file „0000allroms.prg” (128kB).
5. COPY BOTH FILES TO 1541 DRIVE.
6. LOAD&RUN FLASHER (ATMEL OR AMC/AMD)
7. PRESS ERASE ALL CHIP and CONFIRM WITH „Y”
8. PRESS BURN IMAGE,CONFIRM START ADRES „0000” and chose „0000allrom”
9. Wait till disc drive stops reading.
9. Change dip-switch to position „1 RIGHT” and press reset.
TBI

projekt64/howtodoit.txt · ostatnio zmienione: 2013/01/08 21:35 przez kisiel
CC Attribution-Noncommercial-Share Alike 3.0 Unported www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0